Tuesday, March 26, 2019

Whether in ground or above-ground, building your pool is a great scheme and not something that should be undervalued in terms of your time, budget or labour. When they are correctly constructed, concrete swimming pools last for years.

Designing & Documenting your pool

• The first step is to search for a place on your property with enough room for the pool. The spacious backyard is the best option as there will be no need to remove the obstacles like rocks, fences, trees or utility lines. 

• You must leave a space for features like diving boards and pump systems. Put your pool over a slope so that debris does not wash it during rainy days.

• Second, you need to sketch a basic design for your pool. You need to plan about the shape, size and outlining features like lightning, pool steps and other accessories. Usually, an average concrete swimming pool has dimensions of 10ft* 20ft in size with depth up to 10ft. Your pool must have a thickness of 6 inches (15 cm).

• However, you may take advice from trustworthy and experience concrete pool contractor. Then after hiring, ask your pool builder to apply for the building permits required by your local government. 

Excavating the swimming pool base

• Now you need to measure and mark the pool dimensions on the ground. Keep in mind to dig out enough space to make the thick slabs of concrete for the pool floor and walls.

• Next, dig out the soil to formulate the basic shape of the pool. You must set the excavated soil away from the edge of the pool.  Make use of tape or marked measuring sticks to keep track of the pool depth. 

• Make clear in your mind you have your permit and familiar with about any utility lines in the ground. Striking a utility line is a big crisis. Engage a contractor to take care of any utility lines needing to be stimulated.

• Further level the bottom of the pool with the help of steel tined rake and flatten the soil with tamper tool.  Set up the stakes in the pool corners to keep track of the pool levelness. Shape your pool according to your original design. For example, your pool may have an inclined floor. Build the slope as regular as possible, raking the soil horizontal to keep your pool from damage soon.

• Now frame the pool with steel rebar and plywood boards. Select the rebar rods about 0.625 inches in diameter. Place them along the pool interior in a zigzag pattern and space them out by two and a half in thick plywood about the upper edge of the pool to stop poured concrete from leaking out. Next, utilise the rebar bender to fit the metal along the walls. 

• It outlines a frame that supports the concrete after you pour it. Always position the rebar net before adding the concrete.

• Now install the plumbing lines underneath the rebar and plywood. There is a need to dig channels for guiding PVC pipes from the pool to the filtration system as well as the pump. 

• Consult a professional for plumbing, pool filtration system and other electrical components.

Completing the pool interior

• Now finally pour the concrete into the swimming pool to create the bottom slab. Spray the walls to cover them with concrete. Coat the walls to create a layer of the concrete at least 6 inches thick and insert concrete to the top lip of the pool marked off by plywood.

• Cover the concrete with the plastic sheet for a minimum of six days. After that cover the pool basin with the glass, ceramic and porcelain tiles to make it waterproof. Finally install the coping with concrete, marble or stone around the lip of the pool.

• Every approach includes a different visual to your pool, but they all waterproof the uncovered concrete. Wait at least 1 to 2 days for the tile and coping to make well before adding up water to the swimming pool.

• After completing all the process, fill water to your concrete swimming pools and enjoy.

No comments:

Post a Comment